High Pressure 300lbs-1500lbs china forged steel gate valve factory supplier
What's the 1500lbs gate valve ?
API602 1500lbs gate valve Forged Steel Gate Valve is a special design of small sizes gate valves.
it has all the characteristics of gate valves.as normal,the opening and closing parts are the gate,in shape of a wedge,that's the reason that they are named as wedge gate valve.the direction of motion of the gate is perpendicular to the fluid direction. The wedge gate valve can only be fully opened and fully closed and can not be adjusted and throttled.The gate valve was designed to be used either fully open or fully closed, because due to the shape of its obturators which have the shape of a wedge, if it were operated partially open, there would be a great loss of pressure and the sealing surface will be damanged under impact of the fluid.
Main features of 1500lbs gate valve
Main features of the API602 1500lbs gate valve
- 4)Stem-gate connection designed so that under severe applied loads (stuck gate), the stem will fail outside of the stuffing box pressure boundary.
- 5)Backseat designed to relieve back pressure on the stem packing when fully seated. Replacing stem packing under pressure is not recommended.
- 6)Stem packing is designed for optimum control of fugitive emissions leakage to the atmoshphere. The ultra-low emission leakage rate is assured by the fine finish on the stem sealing area, the reduced diametrical clearences and the stem straightness control.
- 7)Bellows seal is available on request
- 8)Stellite seat rings provide increased resistance to wear, abrasion and erosion of the sealing surfaces.
- 9)expanded Seat Rings.
- 10)Low fugitive emissions control.
Technical specifications of 1500lbs gate valve
Specifications of API602 forged steel gate valve
Design and manufacture | API602/BS5352/ASME B16.34 |
Diameter(NPS) | 1/2"-2" |
Port(bore) | Standard port(reduced bore) and full port(full bore) |
Pressure rating(Class) | 800lbs-1500lbs-2500lbs |
Body materials | A105/F11/F22/F304/F304L/LF2/LF3/F316 |
Trim materials | No.1/No.5/No.8,SS304/SS316/Monel |
Socket weld | ANSI B16.11 |
Thread | ASME B1.20.1 |
Flanges | ASME B16.5,welded flange and integral flange |
Bolted Bonnet and welded Bonnet | 800lbs-1500lbs |
Pressure seal bonnet(PSB) | 1500lbs-2500lbs |
NACE | NACE MR-0175 or MR-0103 |
Test and inspection | API598 |
Product Show: 1500lbs gate valve
Application of 1500lbs gate valve
This kind of API 602 1500lbs gate valve is widely utilized in pipeline with liquid & other fluids. Petrol,oil,Chemical,Petrochemical,Power and Utilities etc,especially in conditions where high flow efficiency, tight shut off and long service is required. A wide choice of shell and trim materials do cover the whole range of applications, from the every-day type of non-corrosive service to critical service with highly aggressive media.