Angle type globe valve ,is normally designed and manufactured according to Germany standard and European standard EN13709.as normal,it's linear motion closing-down valve used to start, stop or regulate the flow using a closure member referred as a disc. the Angle type globe valve are most suitable and widely used to control or stop the flow of liquid or gas through a pipe for throttling and controlling fluid flow and are generally employed in small size piping.

it was invented to meet strict requirements of tightness and severe working conditions.except for the conventional packing assembly as all the gate valve,the Angle type globe valve also has a bellow packing device.The accordion-shaped bellows is contained and protected inside the thick metal tube.One end of the bellows is welded to the valve stem, and the other end is welded to the protective tube. With the wide flange of the tube firmly clamped in the bonnet of the valve, a leak-free seal exists.

normally there are three primary body patterns or designs for Angle type globe valve:

• 1).Standard Pattern (also as Tee Pattern or T – Pattern or Z – Pattern)
• 2).Angle Pattern
• 3).Oblique Pattern (also known as Wye Pattern or Y – Pattern)