ASME B16.34 swing check valve,swing check valve designed and manufacturered according to ASME B16.34,test and inspect to API598,API6D.

When liquid is traveling in the desired direction, the pressure of the flow pushes the door open, allowing liquid to pass through. When liquid travels in the wrong direction, the opposite happens. The force of liquid coming back through the valve pushes the disc against its seat, closing off the valve. When installing a swing check valve, it is vital that it opens when liquid is passing through the desired direction. If you install one of these valves and no water goes through, then it is the wrong way around and must be reinstalled. If your swing check valve has a true union design, it can easily be removed from the pipeline.These valves are available in many different forms. Metal swing check valves are often seen in heavy industrial use.

Check valves,non-return valves,are designed to prevent the reversal of flow in a piping system. These valves are activated by the flowing material in the pipeline.The pressure of the fluid passing through the system opens the valve, while any reversal of flow will close the valve.Closure is accomplished by the weight of the check mechanism,by back pressure, by a spring, or by a combination of these means.

 As stated before, a swing check valve is for when you want fluid traveling in only one direction. Another important detail about these valves is that they require no external power, which makes them ideal for a wide range of applications. They also let fluid pass through without slowing down the flow much when fully open.Swing check valves are usually installed in conjunction with gate valves because they provide relatively free flow.They are recommended for lines having low velocity flow and should not be used on lines with pulsating flow when the continual flapping or pounding would be destructive to the seating elements.This condition can be partially corrected by using an external lever and weight.