-
2020 Latest Design Gas Ball Valve - Trunnion mounted Ball Valve – Nortech
What’s Trunnion mounted ball valves? The ball valve is a form of quarter-turn valve which uses a hollow, perforated and fixed/supported ball to control flow through it. A trunnion mounted ball valve means that the ball is constrained by bearings and is only allowed to rotate, the majority of the hydraulic load is supported by the System constraints, resulting in low bearing pressure and no shaft fatigue. Advantages of trunnion ball design is the lower operating torque, ease of operation... -
Newly Arrival Shut Off Gate Valve - API 600 Wedge Gate valve – Nortech
Product Detail: What is API 600 Wedge Gate valve ? The opening and closing parts of the API 600 Wedge Gate valve are the gate, the direction of motion of the gate is perpendicular to the fluid direction. The wedge gate valve can only be fully opened and fully closed and can not be adjusted and throttled. It consists of a valve body, a bonnet, and a disk that is connected to a hinge. The disk swings away from the valve-seat to allow flow in the forward direction, and returns to valve-seat whe... -
Best quality Bellow Seal Valve Factory - ASME Globe Valve – Nortech
Product Detail: What is ASME Globe Valve? ASME Globe Valve is a mechanism used to control or stop the flow of liquid or gas through a pipe. The seat of a globe valve is in the middle of and parallel to the pipe, and the opening in the seat is closed off with a disk or plug. Globe valves can be structured to handle flow in either direction. ASME Globe Valve Technical Specifications 2″-12″,Class150-Class1500 BS1873/ASME B16.34 Face to face to ANSI B16.10 Body/bonnet/disc:Carbon Ste... -
2020 Latest Design Gas Ball Valve - Double Block And Bleed Ball Valve – Nortech
Product Detail: What is Double Block And Bleed Ball Valve ? Double Block And Bleed Ball Valve is a combination of one or more block/isolation valves, usually ball valves, and one or more bleed/vent valves, usually ball or needle valves. The purpose of the block and bleed valve system is to isolate or block the flow of fluid in the system so the fluid from upstream does not reach other components of the system that are downstream. This enables the engineers to bleed off or vent or drain the re... -
2020 Good Quality Semi-Lug Butterfly Valve - PTFE lined butterfly valve – Nortech
Product Detail: What is PTFE lined butterfly valve ? PTFE lined butterfly valve is a valve used for flow regulation in large pipe diameters in which the disc takes the form of disk. Operation is similar to that of a ball valve. A plate or disc is positioned in the center of the pipe. The disc has a rod passing through it that is connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc... -
Factory For 3pcs Ball Valve - 3 Piece Floating Ball Valve – Nortech
What’s 3 piece floating ball valve? The 3 Piece Floating Ball Valve has two body joints which means the body is made out of of three pieces, giving rise to the name “three piece. This 3 piece body design allows a larger ball to be installed at the time of manufacture,making this a full bore ball valve (Full port). Nortech 3 Piece Floating ball valve is a new product manufactured by transformation the common valve and adoption of the up-to-date international standard. Main features 3 pi... -
High Quality for Ball Type Check Valve - Rubber Seat Dual Plate Check Valve – Nortech
What’s the rubber seat dual plate check valve? The Dual Plate Check Valve is an all purpose non return valve that is much stronger, lighter in weight and smaller in size compared to a conventional swing check valve or life check valve.it employs two spring-loaded plated hinged on a central hinge pin. When the flow decreases, the plates close by torsion spring action without requiring reverse flow.This design offers the twin advantages of No Water Hammer and Non Slam simultaneously.... -
Chinese Professional Double Door Wafer Check Valve - Rubber Seat Dual Plate Check Valve – Nortech
What’s the rubber seat dual plate check valve? The Dual Plate Check Valve is an all purpose non return valve that is much stronger, lighter in weight and smaller in size compared to a conventional swing check valve or life check valve.it employs two spring-loaded plated hinged on a central hinge pin. When the flow decreases, the plates close by torsion spring action without requiring reverse flow.This design offers the twin advantages of No Water Hammer and Non Slam simultaneously.... -
2020 wholesale price Electric Ball Valve - 3 Piece Floating Ball Valve – Nortech
What’s 3 piece floating ball valve? The 3 Piece Floating Ball Valve has two body joints which means the body is made out of of three pieces, giving rise to the name “three piece. This 3 piece body design allows a larger ball to be installed at the time of manufacture,making this a full bore ball valve (Full port). Nortech 3 Piece Floating ball valve is a new product manufactured by transformation the common valve and adoption of the up-to-date international standard. Main features 3 pi... -
2020 High quality Full Wafer Butterfly Valve - Triple Eccentric Butterfly Valve – Nortech
what’s triple eccentric butterfly valve? Triple eccentric butterfly valve,also known as triple offset butterfly valve,is one kind of high performance butterfly valves,designed for working conditions of high pressure,high temperature,and high frequencies of open and close. Concentric rubber lined butterfly valve,with mature design and manufacturing technology,are reliable in quality and friendly in cost.But for severe applications such as high temperatures or at high opening and clo... -
New Arrival China Clamp Check Valve - Cast Iron Swing Check Valve – Nortech
What’s cast iron swing check valve? Cast Iron Swing Check Valve consists of a valve body,a bonnet,and a disc that is connected to a hinge. The disc swings away from the valve-seat to allow flow in the forward direction,and returns to valve-seat when upstream flow is stopped,to prevent back flow.it allows full,unobstructed flow and automatically closes as pressure decreases.These valves are fully closed when the flow reaches zero and prevent back flow.Turbulence and pressure drop within ... -
Factory Supply Trunnion Ball Valve - Metal Seated Ball Valve – Nortech
Product Detail: What is Metal Seated Ball Valve ? Metal to metal seat ball valve owns not only various advantages of common industrial ball valves,but also particular and outstanding characteristics in heat-durability,especially when soft seal could not be used,such as in pipeline delivery of medium with high friction dust,slurry,and solid foreign matters mixture. The seat is of stainless copper body with stellite alloy pile-up welding.The ball is of stainless copper body,with three surface t...
- Call Support 021-54717893
- Email Support sales@nortech-v.com